Go Backs
HomeCategoriesStatesCheck Your Home
Go Backs

Track product recalls and safety alerts from CPSC, FDA, NHTSA, and USDA. Stay informed and keep your family safe.

Browse

  • Categories
  • States
  • Check Your Home
  • Risk Levels

Agencies

  • CPSC
  • FDA Food
  • FDA Drug
  • FDA Device
  • FDA Veterinary
  • NHTSA
  • USDA

Company

  • About
  • FAQ
  • Contact
  • Terms of Service
  • Privacy Policy
Buy Me a Coffee

Recall data is sourced from official U.S. government agencies (CPSC, FDA, NHTSA, USDA) and processed using AI to improve readability. This site is not affiliated with or endorsed by any government agency. Always refer to the original agency notice for authoritative information.

© 2026 Go Backs. All rights reserved.

Medium RiskFDA Device

Siemens Medical Solutions USA, Inc: In rare cases of insufficient maintenance or high clinical workload, the first rope of the ceiling stand, which is designed to take the load, could break without triggering the safety lock and this could lead to overloading the safety rope which is not designed for continuous load and ongoing movement under load. This may lead to mechanical fatigue and cause the arm to drop down during patient positioning. Patients and users may be seriously injured.

Agency Publication Date: August 17, 2018
Share:
Sign in to monitor this recall

Affected Products

Product: 3D TOP Ceiling Stand, model no. 3070039 3074486 3070013 3070021 Product Usage: The ceiling stand is used to hold the X-ray tube and / or the detector and is moveable on a ceiling rail system in three axis. The tube and / or detector can be rotated above a horizontal and a vertical axle. The ceiling stand can be used within a stationary diagnostic X-ray system as well.

3070039: S/N 2271 to 2793 3074486: S/N 1812 to 3036 3070013: S/N 3967 to 5042 3070021: S/N 3852 to 4719

Product: 3D V, model. no. 7042042 7042059 3070021 Product Usage: The ceiling stand is used to hold the X-ray tube and / or the detector and is moveable on a ceiling rail system in three axis. The tube and / or detector can be rotated above a horizontal and a vertical axle. The ceiling stand can be used within a stationary diagnostic X-ray system as well.

7042042 : S/N 1002 to 1787 7042059: S/N 1002 to 1921

Additional Information

Agency: Food and Drug Administration (FDA)
Event ID: 80735
Status: Resolved
Manufacturer: Siemens Medical Solutions USA, Inc
Manufactured In: United States
Units Affected: 2 products (699; 667)

Were You Affected by This Recall?

If you or a family member were harmed by this recalled product, you may have legal rights. Consider consulting a consumer protection attorney to understand your options for compensation.

Find an Attorney

This is general information, not legal advice. Go Backs is not a law firm and does not provide legal services.

AI-Enhanced Content: The summary, action steps, and risk assessment on this page were generated by AI from official government recall data to improve readability. This is not legal or medical advice. Always refer to the official agency sources below for authoritative information.

Sources: FDA iRES · Raw API Response

openFDA Disclaimer: This recall information is sourced from the openFDA API. Do not rely on openFDA to make decisions regarding medical care. While we make every effort to ensure that data is accurate, you should assume all results are unvalidated. Refer to the openFDA terms of service for more information.